Black Hawk Nitrile Glove

Black Hawk glove, black polyamide with black foam nitrile coating

• Ultra lightweight seamless polyamide/spandex shell with soft sandy NBR palm coating
• Highly sensitive grip with form fitting liner for the most precise handling
• Excellent grip in dry or oily conditions
• Rated EN388/CE 4121 Resistance to abrasion rating 4: Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. 
• EN388:2016 - 4131X Updates the EN 388:2008 standard. It continues the previous test’s methods with some alterations including a change to the way the coup cut test is carried out (the second figure giving the coup cut resistance rating may be expressed as 'X' if the glove is not tested under the coup test or if the rolling blade becomes blunt before the test is completed). It adds a fifth letter (A to F, with F being highest) for cut resistance using the sliding blade TDM test and a sixth letter to indicate impact protection, expressed as 'P' for pass. If the glove is not designed to provide impact protection the sixth figure is left out, or sometimes 'F' (fail).

Glove Size Chart